Product Description:
Our production machine cellular bridge girder section from
triangular beam welded together, the whole heart weight low beam,
very safe, middle body of the cellular beam hole of wind on the
beam can reduce the impact of physical, inter-connecting beam
section of six steel pin connected to the assembly facilities.
Cellular beam bridge between the weight machine box girder and
truss beams between the large deflection of small steel,
through-hole without pre-beam without an increase in weight and can
be direct through-hole. Another outstanding advantage is the
erection of beams, cellular beam bridge can be used single-beam
machine weight lifting side, outrigger is not vacant, can be set up
to move the control of erecting machine moving distance, moving
around freely,
Place is very accurate, girder error within 5mm, replacing the use
of push and pull of human pry bar, very convenient. Cellular bridge
beam bending machine can be set up within 5 degrees, including
degrees, up and down the slope less than or equal to 5% within the
span of less than 60 meters in the road and rail bridges, according
to user requirements, but also the realization of the reverse
bridge and set up a special bridge .
I have won the State General Administration of Quality Supervision,
Inspection and testing issued "special permits authorized security
equipment manufacturers" and "transform the installation of special
equipment maintenance certificate", can help the user for lifting
appliances "safety inspection certificate" procedures.
Advantages: erecting machine (patent number) domestic first
cellular beam design, high strength, deflection of a small, steel
is good, a number of high safety factor. Unique pin connections,
greatly reducing the assembly time, weight-bearing beams traverse
the adoption of side one in place. Also based on user needs to
install electronic monitoring devices, to avoid observation vacant.
| // | 50-160B | 40-100B | 35-80B | 30-60B |
|---|
| 50m | 40m | 35m | 30m |
| 160t | 100t | 80t | 60t |
| 0.8m/min | 0.8m/min | 0.8m/min | 0.8m/min |
| 4.5m/min | 4.5m/min | 4.5m/min | 4.5m/min |
| 2.7m/min | 2.7m/min | 2.7m/min | 2.7m/min |
| 80t×2 | 50t×2 | 40t×2 | 30t×2 |
| 4-8M/min | 4-8M/min | 4-8M/min | 4-8M/min |
| 18M/min | 18M/min | 18M/min | 18M/min |
| 45° | 45° | 45° | 45° |
| R350 | R300 | R300 | R300 |
